DEHNguard modular SN

Featuring the functional Red/Line family design, the modular DEHNguard M ... surge arresters set new standards in terms of safety and ease of use. The proven protective circuit with heavy-duty zinc oxide varistors in combination with the dual "Thermo Dynamic Control" monitoring device are characteristic of the DEHNguard technology.

DEHNguard 3P440 SN1861 FM

Modular surge arrester for use in TN-C systems.

1 Prodotto

Art. 999925 DG M 3P440 SN1861 FM

GTIN (EAN) 4013364467309, Codice doganale (EU): 85363030, Peso lordo: 338.92 g, UM: 1.00 pc(s)

Immagini

Maggior informazioni

DEHNguard M TNC 275 surge arrester
3-pole, modular, pluggable surge arrester
for TN-C systems, width: 3 modules
Type 2 arrester as per EN 61643-11
Fault indication
Max. continuous operating voltage: 275 V AC
Voltage protection level: <= 1.5 kV
Nominal discharge current: 20 kA
Short-circuit withstand capability 50 kAeff
Energy coordination according to DIN EN 62305-4
Arrester of the Red/Line series

Brand: DEHN
Type: DG M 3P440 SN1861 FM
Part No.: 999925
or equivalent.

Caratteristiche tecniche

SPD as per EN 61643-11 / ... IEC 61643-11	Type 2 / class II
Max. continuous operating voltage (AC) (U_C )	440 V
Nominal discharge current (8/20 µs) (I_n )	20 kA
Max. discharge current (8/20 µs) (I_max )	30 kA (L-PE) / 40 kA (L-L)
Max. mains-side overcurrent protection	125 A gG (AC) / 80 A gPV (DC)
Remote signalling contact / type of contact	Changeover contact

SPD as per EN 61643-11 / ... IEC 61643-11	Type 2 / class II
Energy-coordinated protection effect with terminal equipment (≤ 10 m)	Type 2 + type 3
Power supply system	IT AC 400 2^~
Max. continuous operating voltage (DC) (U_C )	600 V
Max. continuous operating voltage (AC) (U_C )	440 V
Nominal discharge current (8/20 µs) (I_n )	20 kA
Max. discharge current (8/20 µs) (I_max )	30 kA (L-PE) / 40 kA (L-L)
Lightning impulse current I_{(10/350 µs)}(L1+L2 - PE)	2 kA
DC sparkover voltage (L-PE)	1400 V +/- 20%
Impulse sparkover voltage (1.2/50 µs)	< 2.5 kV
Power frequency sparkover voltage (U_aw )	1000 V +/- 20%
Voltage protection level [active conductor -> PE] (U_P )	≤ 3.2 kV
Voltage protection level [active conductor -> active conductor] (U_P )	≤ 4 kV
Response time (t_A )	≤ 25 ns / ≤ 100 ns
Galvanic isolation to earth	Yes / leakage-current-free
Permanent interference voltage according to Ril 819.0804	250 V
Short-time interference voltage according to Ril 819.0804	< 1100 V
Temporary overvoltage [active conductor – PE] (U_T) – characteristic	760 V / 120 min / withstand
Insulation resistance	> 1 G Ohm at 100V DC
Max. mains-side overcurrent protection	125 A gG (AC) / 80 A gPV (DC)
Short-circuit withstand capability for max. mains-side overcurrent protection (I_SCCR )	25 kA AC / 5 kA DC
Operating temperature range (T_U )	-40°C to +80°C
Operating state / fault indication	green / red
Number of ports	1
Cross-sectional area (min.)	1.5 mm²solid / flexible
Cross-sectional area (max.)	35 mm²stranded / 25 mm²flexible
Installation on	35 mm DIN rails acc. to EN 60715
Enclosure material	Thermoplastic, red, UL 94 V-0
Installation point	Indoor
Degree of protection	IP 20
Dimensions	3 Standard DIN module, DIN 43880
Standard	Ril 819.0808
Remote signalling contact / type of contact	Changeover contact
AC switching capacity	250 V / 0.5 A
DC switching capacity	250 V / 0.1 A; 125 V / 0.2 A; 75 V / 0.5 A
Cross-sectional area for remote signalling terminals	max. 1.5 mm²solid / flexible

Prodotto 999925 è stato aggiunto al blocco note.

Apri blocco note

Prodotto 999925 è stato aggiunto al carrello.

Apri Web-Shop

DEHNguard 5P440 SN1862 FM

5-pole railway arrester for the track field power cable; remote signalling contact version with a floating remote signalling contact.

1 Prodotto

Art. 999926 DG M 5P440 SN1862 FM

GTIN (EAN) 4013364467316, Codice doganale (EU): 85363030, Peso lordo: 598.84 g, UM: 1.00 pc(s)

Immagini

Maggior informazioni

Brand: DEHN
Type: DG M 5P440 SN1862 FM
Part No.: 999926
or equivalent.

Caratteristiche tecniche

SPD as per EN 61643-11 / ... IEC 61643-11	Type 2 / class II
Max. continuous operating voltage (AC) (U_C )	440 V
Nominal discharge current (8/20 µs) (I_n )	20 kA
Max. discharge current (8/20 µs) (I_max )	30 kA (L-PE) / 40 kA (L-L)
Max. mains-side overcurrent protection	125 A gG (AC) / 80 A gPV (DC)
Remote signalling contact / type of contact	Changeover contact

SPD as per EN 61643-11 / ... IEC 61643-11	Type 2 / class II
Energy-coordinated protection effect with terminal equipment (≤ 10 m)	Type 2 + type 3
Power supply system	IT AC 400 3^~N
Max. continuous operating voltage (DC) (U_C )	600 V
Max. continuous operating voltage (AC) (U_C )	440 V
Nominal discharge current (8/20 µs) (I_n )	20 kA
Max. discharge current (8/20 µs) (I_max )	30 kA (L-PE) / 40 kA (L-L)
Lightning impulse current I_{(10/350 µs)}(L1+L2+L3+N - PE)	4 kA
DC sparkover voltage (L-PE)	1400 V +/- 20%
Impulse sparkover voltage (1.2/50 µs)	< 2.5 kV
Power frequency sparkover voltage (U_aw )	1000 V +/- 20%
Voltage protection level [active conductor -> PE] (U_P )	≤ 3.2 kV
Voltage protection level [active conductor -> active conductor] (U_P )	≤ 4 kV
Response time (t_A )	≤ 25 ns / ≤ 100 ns
Galvanic isolation to earth	Yes / leakage-current-free
Permanent interference voltage according to Ril 819.0804	250 V
Short-time interference voltage according to Ril 819.0804	< 1100 V
Insulation resistance	> 1 G Ohm at 100V DC
Max. mains-side overcurrent protection	125 A gG (AC) / 80 A gPV (DC)
Short-circuit withstand capability for max. mains-side overcurrent protection (I_SCCR )	25 kA AC / 5 kA DC
Operating temperature range (T_U )	-40°C to +80°C
Operating state / fault indication	green / red
Number of ports	1
Cross-sectional area (min.)	1.5 mm²solid / flexible
Cross-sectional area (max.)	35 mm²stranded / 25 mm²flexible
Installation on	35 mm DIN rails acc. to EN 60715
Enclosure material	Thermoplastic, red, UL 94 V-0
Installation point	Indoor
Degree of protection	IP 20
Dimensions	5 Standard DIN module, DIN 43880
Standard	Ril 819.0808
Remote signalling contact / type of contact	Changeover contact
AC switching capacity	250 V / 0.5 A
DC switching capacity	250 V / 0.1 A; 125 V / 0.2 A; 75 V / 0.5 A
Cross-sectional area for remote signalling terminals	max. 1.5 mm²solid / flexible

Prodotto 999926 è stato aggiunto al blocco note.

Apri blocco note

Prodotto 999926 è stato aggiunto al carrello.

Apri Web-Shop

DEHNguard 4P440 SN1882 FM

3-pole railway arrester for the track field power cable; remote signalling contact version with a floating remote signalling contact.

1 Prodotto

Art. 999985 DG M 4P440 SN1882 FM

GTIN (EAN) 4013364467323, Codice doganale (EU): 85363030, Peso lordo: 447.78 g, UM: 1.00 pc(s)

Immagini

Maggior informazioni

Brand: DEHN
Type: DG M 4P440 SN1882 FM
Part No.: 999985
or equivalent.

Caratteristiche tecniche

SPD as per EN 61643-11 / ... IEC 61643-11	Type 2 / class II
Max. continuous operating voltage (AC) (U_C )	440 V
Nominal discharge current (8/20 µs) (I_n )	20 kA
Max. discharge current (8/20 µs) (I_max )	30 kA (L-PE) / 40 kA (L-L)
Max. mains-side overcurrent protection	125 A gG (AC) / 80 A gPV (DC)
Remote signalling contact / type of contact	Changeover contact

SPD as per EN 61643-11 / ... IEC 61643-11	Type 2 / class II
Energy-coordinated protection effect with terminal equipment (≤ 10 m)	Type 2 + type 3
Power supply system	IT AC 400 3^~
Max. continuous operating voltage (DC) (U_C )	600 V
Max. continuous operating voltage (AC) (U_C )	440 V
Nominal discharge current (8/20 µs) (I_n )	20 kA
Max. discharge current (8/20 µs) (I_max )	30 kA (L-PE) / 40 kA (L-L)
Lightning impulse current I_{(10/350 µs)}(L1+L2+L3+N - PE)	3 kA
DC sparkover voltage (L-PE)	1400 V +/- 20%
Impulse sparkover voltage (1.2/50 µs)	< 2.5 kV
Power frequency sparkover voltage (U_aw )	1000 V +/- 20%
Voltage protection level [active conductor -> PE] (U_P )	≤ 3.2 kV
Voltage protection level [active conductor -> active conductor] (U_P )	≤ 4 kV
Response time (t_A )	≤ 25 ns / ≤ 100 ns
Galvanic isolation to earth	Yes / leakage-current-free
Permanent interference voltage according to Ril 819.0804	250 V
Short-time interference voltage according to Ril 819.0804	< 1100 V
Temporary overvoltage [active conductor – PE] (U_T) – characteristic	760 V / 120 min / withstand
Insulation resistance	> 1 G Ohm at 100V DC
Max. mains-side overcurrent protection	125 A gG (AC) / 80 A gPV (DC)
Short-circuit withstand capability for max. mains-side overcurrent protection (I_SCCR )	25 kA AC / 5 kA DC
Operating temperature range (T_U )	-40°C to +80°C
Operating state / fault indication	green / red
Number of ports	1
Cross-sectional area (min.)	1.5 mm²solid / flexible
Cross-sectional area (max.)	35 mm²stranded / 25 mm²flexible
Installation on	35 mm DIN rails acc. to EN 60715
Enclosure material	Thermoplastic, red, UL 94 V-0
Installation point	Indoor
Degree of protection	IP 20
Dimensions	4 Standard DIN module, DIN 43880
Standard	Ril 819.0808
Remote signalling contact / type of contact	Changeover contact
AC switching capacity	250 V / 0.5 A
DC switching capacity	250 V / 0.1 A; 125 V / 0.2 A; 75 V / 0.5 A
Cross-sectional area for remote signalling terminals	max. 1.5 mm²solid / flexible

Prodotto 999985 è stato aggiunto al blocco note.

Apri blocco note

Prodotto 999985 è stato aggiunto al carrello.

Apri Web-Shop

Results for products (0)

Results for content (0)

DEHNguard modular SN

DEHNguard 3P440 SN1861 FM

Art. 999925 DG M 3P440 SN1861 FM

Prodotto 999925 è stato aggiunto al blocco note.

Prodotto 999925 è stato aggiunto al carrello.

DEHNguard 5P440 SN1862 FM

Art. 999926 DG M 5P440 SN1862 FM

Prodotto 999926 è stato aggiunto al blocco note.

Prodotto 999926 è stato aggiunto al carrello.

DEHNguard 4P440 SN1882 FM

Art. 999985 DG M 4P440 SN1882 FM

Prodotto 999985 è stato aggiunto al blocco note.

Prodotto 999985 è stato aggiunto al carrello.

DEHNguard modular SN

DEHNguard 3P440 SN1861 FM

Art. 999925 DG M 3P440 SN1861 FM

Non siete autorizzati per eseguire un download 999925_SN1861m_D.dxf

Prodotto 999925 è stato aggiunto al blocco note.

Prodotto 999925 è stato aggiunto al carrello.

DEHNguard 5P440 SN1862 FM

Art. 999926 DG M 5P440 SN1862 FM

Non siete autorizzati per eseguire un download 999926_SN1862m_D.dxf

Prodotto 999926 è stato aggiunto al blocco note.

Prodotto 999926 è stato aggiunto al carrello.

DEHNguard 4P440 SN1882 FM

Art. 999985 DG M 4P440 SN1882 FM

Non siete autorizzati per eseguire un download 999985_SN1882m_D.dxf

Prodotto 999985 è stato aggiunto al blocco note.

Prodotto 999985 è stato aggiunto al carrello.